| Food
Grade Non-Stick Coatings
Engineered for non-stick (release) with outstanding
corrosion and abrasion resistance under load with operating
temperatures up to 315 C, this family of coatings offer outstanding
results on biscuit stamps, confectionery moulds, tanks, elements,
hoppers, vats, table tops, folding plates, sealing tools and
the like. These coatings are approved for food contact.
|
SO9-S & SO9-K:
Release Coating
HPC's SO9 is a durable fluoropolymer
coating material with outstanding non-stick properties.
This coating is noteworthy because of two unique properties:
it has arguably the best non-stick properties of any
single coat non-stick coating; it is extremely flexible,
allowing it to be post formed. Other attributes of this
coating include good chemical resistance and cured films
with glass like smoothness. It has a continuous use
temperature of 204°C and intermittent temperature
of 250°C and is completely colour stable at elevated
temperatures.
S = Light Grey in colour
K = Black in colour
Applications include:
- Heat Seal Bars for Plastic Welding
- Moulds & Rollers processing high
sugar products
- Folding Plates for Plastic Film
|
|
SO8-K: Non-stick, Low Friction Coating
This coating provides an excellent non-stick
film on pans, food processing equipment etc. SO8-K uses FDA
accepted components similar to HPC's SO2 coating and has equivalent
lubrication and chemical resistance properties with a low
co-efficient of friction.
Applications include:
- Folding Plates for Plastic Film
- Machine Slides
|
PO1
HPC's PO1 is a premium quality, high
temperature, chemical resistant coating with the additional
benefits of good electrical properties, good mechanical
properties with excellent release characteristic. PO1
is applied over a catalyed primer to achieve excellent
bond strength. The cured film has a service temperature
rating of 260°C.
Applications include:
- Vacuum Forming Tools that make Plastic
Plates and Trays for Food
- Heat Seal Tools for Food Packaging
- Heated Paper Fibre Pressure Tool
- Weld Plates for Plastic
|
|
Return
to top of page
|
